Welcome to Putt Window, your ultimate mixed reality putting experience! Follow these steps to use your real ball and putter with Putt Window using an external camera setup.
1. Visit the MLM2PRO-GSPro Connector GitHub repository.
2. Follow the instructions provided in the repository to download and install the MLM2PRO-GSPro Connector on your PC.
If you're using an Exputt:
If you're using a webcam:
Putt Window is compatible with the OpenAPI v1, so the connector software will connect to it as if it were connecting to GSPro.
1. Once your camera-based setup is ready, open the MLM2PRO-GSPro Connector on your PC.
2. In the connector settings, configure the putting settings to work with your camera setup (either Exputt or the webcam).
3. Set the destination IP address to the IP address of your mixed reality headset.
4. Ensure that the port number is set to
1921, which is used by Putt Window instead
of the standard GSPro port 0921.
1. Ensure your mixed reality headset is connected to the same network as the PC running the MLM2PRO-GSPro Connector.
2. Launch Putt Window in your mixed reality headset.
3. In the MLM2PRO-GSPro Connector software, point it to the headset IP address, as if connecting to GSPro.
4. Start the connection, and the connector will now relay the shot data to Putt Window.
1. Enter setup mode in Putt Window.
2. Follow the instructions in the headset to align the origin and hitting direction of the virtual putting green with your real putting setup.